Basis set and density functional dependence of vibrational Raman optical activity calculations

We present an extensive investigation of the dependence of the scattering intensity difference of right and left circularly polarized light observed in vibrational Raman optical activity (VROA) on the choice of basis set and exchange-correlation functional. These dependencies are investigated for five molecules for which accurate experimental data are available: (S)-methyloxirane, (R)-epichlorhydrin, (S)-glycidol, (M)-spiro[2,2]pentane-1,4-diene, and (M)-sigma-[4]-helicene. Calculations are presented using the SVWN exchange-correlation functional (LDA), the BLYP exchange-correlation functional, and the B3LYP hybrid functional, using six different basis sets: the cc-pVDZ, cc-pVTZ, aug-cc-pVDZ, aug-cc-pVTZ, Sadlej's polarized basis set, and a minimal VROA basis set recently proposed by Zuber and Hug. It is demonstrated that results from pure gradient-corrected and hybrid functionals are comparable and that the aug-cc-pVDZ and aug-cc-pVTZ basis sets yield similar results. Furthermore, the combination of the small basis set by Zuber and Hug with an accurate force field represents the best compromise between computational accuracy and computational efficiency.     

New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.     

Catalytic (3 + 2) annulation of donor–acceptor aminocyclopropane monoesters and indoles

The efficient catalytic activation of donor–acceptor aminocyclopropanes lacking the commonly used diester acceptor is reported here in a (3 + 2) dearomative annulation with indoles. Bench-stable tosyl-protected aminocyclopropyl esters were converted into cycloadducts in 46–95% yields and up to 95 : 5 diastereomeric ratio using catalytic amounts of triethylsilyl triflimide. Tricyclic indoline frameworks containing four stereogenic centers including all-carbon quaternary centers were obtained.

A catalytic dearomatization of indoles with D–A aminocyclopropane monoesters for the synthesis of highly substituted indolines.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Molecular recognition in a uradinyl-functionalized stable radical

Stable radical 2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl (1) binds to hydrogen-bonding complement 2,6-di(propylamido)pyridine (DAP) in chloroform with Ka=220 M(-1) at 33 degrees C; ESI-MS shows not only 1:DAP complementary dyad formation, but also 1:(DAP)2 formation at higher concentrations of DAP.     

Vaporisation et dissociation thermique des sulfures de phosphore P4S3, P4S7 et P4S10 a l'etat gazeux

Résumé Nous avons montré par spectrométrie Raman à chaud et mesure des tensions de vapeur que P₄S₃ se vaporise de façon congruente tandis que P₄S₇ et P₄S₁₀ se dissocient dès le début de leur vaporisation. P₄S₇ donne réversiblement P₄S₃ et soufre. P₄S₁₀ se dissocie irréversiblement en P₄S₇ et soufre. A l'état de vapeur non saturante, P₄S₃ se dissocie au-dessus de 600° avec formation de phosphore, de soufre et d'autres espèces non identifiées.Nous avons mesuré expérimentalement la capacité calorifique de P₄S₃ liquide, calculé celle de P₄S₃ gazeux et son entropie standard. Nous avons aussi estimé l'enthalpie standard de vaporisation de P₄S₃ à l'aide des mesures des tensions de vapeur saturante. Nous en avons déduit l'entropie standard de P₄S₃ liquide et son point d'ébullition.

---

It is shown by Raman spectroscopy at high temperature and by vapor tensimetric measurements that the vaporisation of P₄S₃ is congruent, whereas P₄S₇ and P₄S₁₀ dissociate at the beginning of vaporisation. P₄S₇ gives P₄S₃ and sulfur reversibly. The dissociation of P₄S₁₀ into P₄S₇ and sulfur is irreversible. Above 600°, in non-saturated vapour the dissociation of P₄S₃ gives phosphorus, sulfur and some unidentified gaseous species. The heat capacity of liquid P₄S₃ has been measured. That of gaseous P₄S₃ and its standard entropy have been calculated. The vaporisation standard enthalpy of P₄S₃ has been estimated from the experimental results on the saturated vapour pressures. The standard entropy of liquid P₄S₃ and its boiling point have been derived from these data.

---

Zusammenfassung Mittels Raman-Spektrometrie bei erhöhter Temperatur und durch Messung der Dampfdrucke wurde festgestellt, daß sich P₄S₃ verflüchtigt, während P₄S₇ und P₄S₁₀ mit Beginn der Verflüchtigung dissoziieren. P₄S₇ ergibt reversibel P₄S₃ und Schwefel. Im Zustand ungesättigten Dampfes dissoziiert P₄S₃ oberhalb von 600° unter Bildung von Phosphor, Schwefel und anderer nicht identifizierter Substanzen.Die Wärmekapazität von flüssigem P₄S₃ wurde gemessen, während die vom gasförmigem P₄S₃ sowie seine Standard-Entropie berechnet wurden. Die Standard-Enthalpie der Verflüchtigung des P₄S₃ wurde durch Messungen der Sättigungs-Dampfdrucke ermittelt. Daraus wurden die Standard-Entropie des flüssigen P₄S₃ sowie sein Siedepunkt berechnet.

---

- - , P₄S₃ , P₄S₇ P₄S₁₀ . P₄S₇ P₄S₃ , P₄S₁₀ P₄S₇ . 600° P₄S₃ , . P₄S₃, P₄S₃ . P₄S₃. P₄S₃ .

---

---

Nous remercions Monsieur Letoffe du laboratoire du Professeur J. Bousquet, INSA de Lyon, 20 Avenue Albert Einstein 401, 69621 Villeurbanne, qui a r6alis6 pour nous les déterminations expérimentales des capacités calorifiques de P₄S₈ liquide.     

New stereoselective syntheses of cis- and trans-2-methyl-4-arylpiperidines

A stereoselective approach has been developed for the synthesis of cis- and trans-2-methyl-4-arylpiperidines from a common intermediate. The Ni-catalyzed hydrogenolysis of N-Boc-2-methyl-4-aryl-4-piperidinols, obtained by addition of organometallic reagents on N-Boc-2-methyl-4-piperidone, afforded the trans derivatives with up to 95% selectivity whereas the corresponding cis isomers were obtained in the presence of palladium catalysts.     

Chiral ditopic receptors. Application to palladium-catalyzed allylic alkylation

Chiral pyridinooxazoline, quinolinooxazoline, bis(oxazolino)pyridine (pybox), and bisoxazoline (box) derivatives containing crown ether residues were prepared. Some of the ligands were assessed in substrate binding studies and in palladium catalyzed allylic alkylations.     

Ring-opening metathesis polymerization (ROMP) of isomerically pure functional monomers and acyclic diene metathesis depolymerization (retro-ADMET) of functionalized polyalkenamers

ROMP and retro-acyclic diene metathesis (ADMET) were used for the synthesis of new functional polymers and functional oligomers, respectively. Purely exo and enantiomerically pure norbornene and 7-oxanorbornene derivatives were prepared using stereospecific synthesis, effective fractionation and high yield condensation reactions. Successful ROMPs of those monomers were performed using either the new carbenic Schrock’s or Grubb’s catalysts or in some cases a classical bicomponent catalyst. New functional polymers such as optically active poly(norbornene-2-carboxylic acid), reactive poly(norbornene-2-azlactone), and side-chain liquid crystal polyoxanorbornenes were fully characterized. On the other hand, successful depolymerizations of 1,4-polyisoprene and of epoxidized 1,4-polybutadiene via cross-metathesis with 4-octene were performed using a stabilized bicomponent catalyst and the Grubb’s catalyst, respectively. Conditions for the controlled synthesis of epoxidized oligobutadienes and of epoxydienic monomers via retro-ADMET were clearly defined.     

A facility for the production of iodine-123 by spallation of caesium

A facility for the continuous production of iodine-123 by spallation of elemental caesium by 482 MeV protons has been in operation at a TRIUMF beam dump for about 2 years. Radioxenon from the target is efficiently trapped on alumina which is subsequently used to remove the¹²¹Te decay product. The yield is 100 mCi/h from a 20 gm/cm² target at 10 μA. Impurities are¹²⁵I<2% and¹²¹Te<0.2% at 27 hours after end of production. The¹²³I consists mainly of iodide along with significant iodate impurity. The product is used extensively in Canadian clinics for thyroid analyses and for labelling radiopharmaceuticals.